HYDRAULIC ARM FOR LOADING DOCK

Description

MF1 hydraulic loading arm for docks

The MF1 hydraulic arm is a fixed-column articulated manipulator, manufactured in-house, installed next to the loading dock door. It transfers beef and pork half carcasses, hams and meat cuts between the room’s overhead rail and the refrigerated truck without the operator having to carry the weight.

Lifting is hydraulic and operated from the handle with hold-to-run push-buttons; horizontal movement is manual, by turning the front arm. It lifts up to 300 kg, with a reach of 2961 mm and 350° of working rotation.

Advantages

• Effortless for the operator: they guide the load while the hydraulics lift up to 300 kg.
• Everything built into the column: rotating column on bearings with built-in hydraulic power unit (210 bar) and electrical cabinet with main switch.
• Smooth, long-lasting movement: primary, secondary and rotating arms in a parallelogram with Permaglide bushings.
• Controls on the handle with sealed hold-to-run push-buttons, and an emergency stop button under the central joint.
• Hygienic: parts in contact with meat in AISI 304 stainless steel, with smooth surfaces and no corners where residue can build up; cleaned with a pressure washer at the end of each shift.
• Solid installation: anchor plate with M16 threaded rods on a 1200 × 1200 × 500 mm concrete base.
• Custom configuration on request.

Applications

Slaughterhouses, cutting plants, meat wholesalers and distributors, and cold stores with a shipping dock and overhead rail. Indoor use between −15 °C and +30 °C.

You will find all technical data in the Specifications table and in the downloadable PDF data sheet.