Price on request
BASIC low bollard with 2 outlets to protect walls, doors, pillars and racks from impacts by manual pallet trucks. Rubber and resin filling, no core.
H = 250 mm · Ø 100 mm · 1.55 kg · Model BB-BAS-2S
For more information and prices, write to [email protected]
Questions? Call us on +34 967 219 649 or message us on WhatsApp
We reply to quote requests within 24 hours.
The BASIC low bollard with 2 outlets (model BB-BAS-2S) is a protection post 250 mm high and Ø 100 mm that is anchored to the floor to protect walls, doors, pillars, racks and cold room panels from impacts by manual pallet trucks. We make it in Spain.
The BASIC range offers light protection and is designed for facilities where loads are not too heavy and most movements are made with manual pallet trucks. It has no core: its rubber and resin filling absorbs the loads received and the injection-moulded polypropylene shell makes it elastic.
Its outlets let you join it with bars to other bollards with outlets to form barriers that protect whole areas and walkways.
Protection of walls, doors, pillars, racks and panels in cold rooms, cutting rooms and warehouses where manual pallet trucks move around.
Installed without building work, using common tools. Anchoring: 4 M10 expansion anchors. Tools: tape measure, pencil, drill with a 12 mm bit, no. 17 spanner and hand saw.
We recommend leaving 50 mm between the bollard base and the wall, and another 50 mm when protecting a walkway (as long as it does not get in the way of a swing door).
Join this bollard to other bollards with outlets using the Ø 61 mm solid polyethylene bars DFM-750 (0.75 m) and DFM-1000 (1.2 m).
Other ranges: TOP range, PLUS range and ULTRA range. Full comparison of the four ranges at josebernad.com.
Not sure which protection you need? We advise you with no obligation: call us on +34 967 219 649, message us on WhatsApp or write to [email protected].
The inside. BASIC has no core; TOP has an AISI 304 stainless steel frame; PLUS and ULTRA have a 30 mm class 8.8 steel rod. ULTRA is also a solid high-density polyethylene bollard, 500 or 1000 mm high. BASIC, TOP and PLUS are Ø 100 mm, and ULTRA is Ø 120 mm.
It is fixed to the floor with 4 M10 expansion anchors. No building work is needed.
No. You do not need professionals or expensive tools: a tape measure, pencil, drill with a 12 mm bit, no. 17 spanner and hand saw are enough.
We recommend leaving 50 mm between the bollard base and the wall, and another 50 mm when protecting a walkway, as long as it does not get in the way of a swing door.
No. The BASIC range is maintenance-free and, if needed, the bollard is easily replaced.
With the Ø 61 mm solid polyethylene bars DFM-750 (0.75 m) and DFM-1000 (1.2 m), which fit into the outlets of BASIC, TOP and PLUS bollards.
Ask for a price at [email protected] or call +34 967 219 649.
| Weight | 1,55 kg |
|---|---|
| Dimensions | 13,5 × 25 cm |
| Range | BASIC (light protection) |
| Catalogue model | BB-BAS-2S |
| Suitable for | Manual pallet truck |
| Use | Loads that are not too heavy |
| Height | 250 mm |
| Diameter | Ø 100 mm |
| Base | 135 mm |
| Bar outlets | 2 outlets on opposite sides |
| Overall width with outlets | 242 mm |
| Core | No core |
| Filling | Rubber and resin mix that absorbs the loads received |
| Shell | Injection-moulded polypropylene: elastic and highly visible thanks to its bright colours |
| Anchoring | 4 M10 expansion anchors |
| Maintenance | None; easily replaceable |
| CE marking | Yes |
| Food use | Suitable |
| Manufacturing | Made in Spain |
No reviews for this product yet. Only customers who have purchased it can leave a review.
