Free shipping from €199 + VAT · Mainland Spain & Balearics
Free shipping from €199 + VAT (mainland Spain and Balearic Islands)WhatsApp +34 670 863 794Reply in < 24 hOur own technical service

Hygienic profiles

Own manufacture · Since 1987

PVC hygienic coving profile for cold rooms and the food industry

The coved profile that rounds off the joints between wall, floor and ceiling so dirt has nowhere to build up. We make it in Albacete with our own mould and supply it with its corner pieces, end caps and wall protection.

  • 90 mm curve, in 4 m bars
  • Snap-on fitting over an aluminium angle
  • 88 m packs, corner pieces and end caps sold separately
Work out your metres Call us: +34 967 219 649
Curved PVC profile Aluminium angle (hidden) WALL FLOOR

Hygienic PVC and aluminium profiles to finish panel joints in cold rooms, cutting rooms, food workshops and clean rooms.

Read more

Work out your hygienic coving profile

Enter the room size and we tell you how many packs, corner pieces and end caps you need. With that list we send you the price.

Need help choosing? Tell us what you need and we will advise you. We reply in less than 24 h. Mon-Fri 7:00-15:15
Call +34 967 219 649WhatsApp +34 670 863 794

Hygienic PVC and aluminium profiles to finish panel joints in cold rooms, cutting rooms, food workshops and clean rooms. Also known as sanitary coving, hygienic skirting or coved profile. Own manufacture since 1987.

The system, piece by piece

Bars are 4 m long. Internal corners, external corners and the ends of each run are finished with purpose-made pieces.

1 2 4 DoorWall – floorWall – ceilingWall – wall
Schematic drawing. The external corner joint (3) goes on corners that project into the room, such as a pillar.
Joints it coversWall – floor, wall – ceiling and wall – wall
What a pack contains88 m of the profile + angle set, in 22 bars of 4 m
Minimum order1 pack (88 m)
Corner pieces and end capsSeparately, per piece
ColourWhite

How many packs? Add up the metres of all the joints and round up to the next multiple of 88 m. Example: 150 m is 2 packs (176 m).

1

Concave hygienic coving profile

Curved PVC profile with flexible lips, snapped onto an extruded aluminium angle that stays hidden. Ref. 73015015 + 73015020.

2

Triple corner piece

White PVC piece for internal corners, where three surfaces meet. Ref. 73015035.

3

External corner joint

Thermoplastic piece for external corners. It clips onto the aluminium profile and overlaps the coving. Ref. 73015036.

4

End cap

Finishes the end of the profile where a run stops, for example at a door. Ref. 73015038.

Technical data of the concave hygienic coving profile

Taken from the product data sheet. The PDF data sheet can be downloaded from the product page.

Profile materialCo-extrusion of rigid PVC 1009 and flexible PVC 1070
Rigid PVC 1009Shore 80 · non-brittle to −15 °C · softening point +75 °C
Flexible PVC 1070Shore 75 · non-brittle to −30 °C · softening point +55 °C
Curve width90 mm
Projection64 mm
Height of the aluminium angle25.8 mm
Bar length4,000 mm
FixingSnap-on (“click”) over the aluminium angle
ManufactureOwn mould · José Bernad, S.L. (Albacete, Spain)
64 mm 90 mm 25,8
Schematic cross-section, not to exact scale: 90 mm curve, 64 mm projection and 25.8 mm aluminium angle.

Fitted in three steps

Quick snap-on fixing.

Fix the angle

Fix the aluminium angle to the wall or ceiling, along the joint.

Snap on the profile

Press the PVC profile onto the angle until it clicks. The flexible lips seal against the panel.

Finish off

Fit the pieces for internal corners, external corners and ends.

  • Cold rooms
  • Abattoirs
  • Cutting rooms
  • Food workshops
  • Clean rooms
  • Laboratories
  • Hospitals

Skirting, wall protectors and ceilings

The rest of the range, to leave the panel protected and neatly finished.

Hygienic protective skirtingHigh-density polyethylene. 200, 300 or 500 mm high and 20 mm thick. Tongue-and-groove pieces of 2 m. Protects the lower part of the wall from trolleys and pallet trucks.
Wall protectorPressed high-density polyethylene. Models PRP200, PRP300 and PRP500: 200, 300 or 500 mm wide, 15 mm thick, tongue-and-groove pieces of 2 m, with internal and external corners.
Omega ceiling profileWhite-lacquered extruded aluminium for supporting panel ceilings. Boxes of 8 bars of 4 m (32 m). Minimum order: 1 box.
White M10 PVC ceiling panel fixingSelf-tapping white PVC piece, M10 thread, that covers the rod passing through the panel when the ceiling is hung on tie rods.

Frequently asked questions

What installers and food businesses ask us most.

What is a hygienic coving profile?

A coved PVC profile that snaps onto an aluminium angle to round off the joint between wall and floor, wall and ceiling or two walls. With no right angle left, dirt does not build up and cleaning is quicker.

Is it the same as sanitary coving or hygienic skirting?

Yes. Sanitary coving, hygienic coving, coved skirting and sanitary profile are names for the same curved finishing piece. The hygienic protective skirting is a different product: a polyethylene board that protects the lower part of the wall.

How many packs do I need?

Add up the linear metres of all the joints you are going to finish and round up to the next multiple of 88 m. For example, 150 m is 2 packs (176 m). The calculator on this page does it for you.

What does each pack include?

88 linear metres of the set made up of the curved PVC profile (ref. 73015015) and the aluminium fixing angle (ref. 73015020), in 22 bars of 4 m.

Are corner pieces and end caps included?

No. The triple corner piece (ref. 73015035), the external corner joint (ref. 73015036) and the end cap (ref. 73015038) are ordered separately, per piece.

Is it suitable for low-temperature cold rooms?

It is designed for cold rooms. According to the data sheet, the rigid PVC is non-brittle down to −15 °C and the flexible PVC down to −30 °C.

How much does it cost?

It is sold on quotation, because the price depends on the packs you need and the destination. Send us the list from the calculator by WhatsApp on +34 670 863 794 or to [email protected].

Who makes it?

José Bernad, S.L., in Albacete, Spain, with our own mould. We have been working for the food industry since 1987.

Do you have the drawing of the installation?

Send it to us and we will return the full parts list with a price. +34 967 219 649 · WhatsApp +34 670 863 794 · [email protected]

Send drawing by WhatsApp
Go to Top