Price on request
PLUS low bollard with no outlets to protect walls, doors, pillars and racks from impacts by pallet trucks, stackers and forklifts. Class 8.8 steel rod, Ø 30 mm.
H = 250 mm · Ø 100 mm · 3.45 kg · Model BB-PLUS
For more information and prices, write to [email protected]
Questions? Call us on +34 967 219 649 or message us on WhatsApp
We reply to quote requests within 24 hours.
The PLUS low bollard with no outlets (model BB-PLUS) is a protection post 250 mm high and Ø 100 mm that is anchored to the floor to protect walls, doors, pillars, racks and cold room panels from impacts by pallet trucks, stackers and forklifts. We make it in Spain.
The PLUS range offers high protection and is used in facilities with heavy loads moving at high speeds, including forklifts. Its core is a class 8.8 steel rod, Ø 30 mm, and it is designed so that, if it receives a force greater than its strength, the rod bends without damaging the floor or the anchor: the rod is easily replaced, with no building work.
Protection of walls, doors, pillars, racks and panels in cold rooms, cutting rooms and warehouses where pallet trucks, stackers and forklifts move around.
Installed without building work, using common tools. Anchoring: PVC housing and metal nut that holds the rod; 125 mm stem. Tools: tape measure, pencil, drill with a 12 mm bit, no. 17 spanner and hand saw.
We recommend leaving 50 mm between the bollard base and the wall, and another 50 mm when protecting a walkway (as long as it does not get in the way of a swing door).
Other ranges: BASIC range, TOP range and ULTRA range. Full comparison of the four ranges at josebernad.com.
Not sure which protection you need? We advise you with no obligation: call us on +34 967 219 649, message us on WhatsApp or write to [email protected].
The inside. BASIC has no core; TOP has an AISI 304 stainless steel frame; PLUS and ULTRA have a 30 mm class 8.8 steel rod. ULTRA is also a solid high-density polyethylene bollard, 500 or 1000 mm high. BASIC, TOP and PLUS are Ø 100 mm, and ULTRA is Ø 120 mm.
It has a PVC housing with a metal nut that holds the steel rod, with a 125 mm stem.
No. You do not need professionals or expensive tools: a tape measure, pencil, drill with a 12 mm bit, no. 17 spanner and hand saw are enough.
We recommend leaving 50 mm between the bollard base and the wall, and another 50 mm when protecting a walkway, as long as it does not get in the way of a swing door.
Only if it receives an impact that exceeds its strength: the rod bends and you simply replace it, with no building work.
Ask for a price at [email protected] or call +34 967 219 649.
| Weight | 3,45 kg |
|---|---|
| Dimensions | 12 × 25 cm |
| Range | PLUS (high protection) |
| Catalogue model | BB-PLUS |
| Suitable for | Pallet truck, stacker and forklift |
| Use | Heavy loads and high speeds |
| Height | 250 mm |
| Diameter | Ø 100 mm |
| Base | 120 mm |
| Bar outlets | No outlets |
| Core | Class 8.8 steel rod, Ø 30 mm, with excellent mechanical properties |
| Filling | Rubber and resin mix that cushions and spreads loads to the core |
| Shell | Injection-moulded polypropylene |
| Anchoring | PVC housing and metal nut that holds the rod; 125 mm stem |
| Maintenance | If an impact exceeds its strength, the rod bends (without damaging the floor or the anchor) and is replaced without building work |
| CE marking | Yes |
| Food use | Suitable |
| Manufacturing | Made in Spain |
No reviews for this product yet. Only customers who have purchased it can leave a review.
