Free shipping from €199 + VAT · Mainland Spain & Balearics
Free shipping from €199 + VAT (mainland Spain and Balearic Islands)WhatsApp +34 670 863 794Reply in < 24 hOur own technical service

2120 MM MEAT BAND SAW BLADE, BOX OF 4

2120 MM MEAT BAND SAW BLADE, BOX OF 4

29,60€ + VAT / box of 4

35,82€ VAT included (21%) In stock

Box of 4 band saw blades, 2,120 mm, for meat (half-moon tooth), high performance for a clean, residue-free cut.

Tooth size: 7 mm (half-moon).
Recommended for fresh meat.
Dimensions: 2,120 × 16 × 0.40 mm (length × width × thickness).

  • Free shipping from €199 + VATMainland Spain and Balearic Islands
  • We ship within 24–48 hUsually, once payment is received
  • Since 1987 in Albacete (Spain)20,700+ customers · our own technical service
  • Questions? Call or message us+34 967 219 649 · WhatsApp +34 670 863 794 · reply in < 24 h
  • Secure paymentCard, PayPal or bank transfer · 14-day returns
SKU: 78440000 Categories: ,

Description

The 2120 mm meat band saw blade is made from laminated carbon steel with a half-moon tooth (7 mm). It matches saws taking a 2120 mm band and gives a clean cut with no residue on fresh meat. Supplied in a box of four blades.

Band type: MEAT (half-moon). Tooth size: 7 mm (half-moon). Recommended for fresh meat. Dimensions: 2,120 × 16 × 0.40 mm (length × width × thickness).

What a 2120 mm meat blade is used for

At 2120 mm you are at the top end of workshop saws, close to cutting-room equipment. These machines take large pieces and, in their meat version, are used for slicing and portioning boned product in significant quantities.

  • Cutting room: portioning large boned pieces.
  • Meat preparation room: high-volume daily production.
  • Light industry: cutting raw material.
  • Central kitchen: preparing portions in volume.
  • Delicatessen: large-format cured products.

Technical specifications

Band length 2,120 mm
Dimensions 2,120 × 16 × 0.40 mm (length × width × thickness)
Tooth type Half-moon
Tooth size 7 mm (half-moon)
Recommended use Fresh meat.
Application Cutting meat
Material Laminated carbon steel
Cut finish Clean, no residue
Performance High
Supply Box of 4 blades

Cross-contamination at the cutting station

The band, the table and the guides go from one product to the next with nothing between them but cleaning.

The usual practice is to order the work and clean between blocks: product that will be cooked first, then the rest, with an intermediate clean. In sites that also handle allergens or different species, that sequence should be written down rather than left to whoever is on shift that day.

What the supply includes

Box of four 2120 mm band saw blades for cutting meat.

The same length is available in a version for bone.

Frequently asked questions

Which band do I need: meat, bone or frozen?

It depends on what you cut and on your saw’s linear speed (it is in the manual; if you do not know it, call us on +34 967 219 649 with the make and model). The three versions, in this length:

  • MEAT (half-moon): 7 mm (half-moon) tooth. Recommended for fresh meat. Dimensions: 2,120 × 16 × 0.40 mm (length × width × thickness). (this blade)
  • BONE (4 TPI): 6.35 mm (4 teeth per inch) tooth. A very balanced option for bone-in meat and for improving the look of the cut. Especially suited to machines with a linear speed below 20 m/s. Dimensions: 2,120 × 16 × 0.50 mm (length × width × thickness). See the 2,120 mm bone band.
  • FROZEN (3 TPI): 8.46 mm (3 teeth per inch) tooth. Recommended for frozen product: a more aggressive cut and high production volume. Works especially well on machines with a linear speed above 20 m/s. Dimensions: 2,120 × 16 × 0.50 mm (length × width × thickness). Not in our range at 2,120 mm: see other lengths in Saw Blades.

Does the saw need cleaning between species?

It is the recommended practice, and in many food safety plans it is mandatory. The band and the table carry residue from one piece to the next, and that is the most direct route for cross-contamination at the cutting station.

Is wiping it down enough?

For an intermediate clean between batches, removing visible residue and disinfecting surfaces may be enough; the full strip-down clean belongs at the end of the day. What does not work is substituting one for the other.

What about products with allergens?

That needs a stricter protocol, with a complete clean between products and, where possible, separation in time or in equipment. Your allergen plan should set it out explicitly.

Does the order of work matter?

Considerably. Organising the day by grouping similar products reduces the number of intermediate cleans needed and, incidentally, the number of band changes.

Can the band be disinfected while fitted?

Superficially yes, but effective cleaning means taking it off at the end of the day. That is the only way to reach the full run of the blade and the inside of the machine.

How do I know what blade length my saw needs?

The number in the product name (1600, 1820, 2330…) is the blade length in millimetres, and it must match exactly the length specified by your saw’s manufacturer on the rating plate or in the manual. If you have no documentation, measure the old blade laid out along its full circumference. Bernad® can help you confirm the length your machine takes.

How many blades come in a box, and how should I store spares?

Four blades, folded to take up less space and travel protected. Store them in their box, somewhere dry and with nothing heavy on top: moisture rusts carbon steel and crushing deforms the blade. When unfolding them, wear gloves and leave space around you, because the blade springs back into shape suddenly.

Other lengths and blade types

Specifications

Weight 0,2 kg
Multiplo

Same length, other tooth types

No reviews for this product yet. Only customers who have purchased it can leave a review.

Go to Top