Description
The 2120 mm bone band saw blade is made from laminated carbon steel with a special pearled tooth rated for double life. It is built to pass through bone leaving a clean cut with no residue, on saws taking a 2120 mm band. Supplied in a box of four blades.
Band type: BONE (4 TPI). Tooth size: 6.35 mm (4 teeth per inch). A very balanced option for bone-in meat and for improving the look of the cut. Especially suited to machines with a linear speed below 20 m/s. Dimensions: 2,120 × 16 × 0.50 mm (length × width × thickness).
What a 2120 mm bone blade is used for
This is the bone version for large-format saws, already close to the cutting-room bracket. Here bone-in cutting takes in pieces no small machine will accept, and the band works in demanding conditions: hard material, heavy pieces and long cycles.
- Cutting room: separating sections from quarters and carcasses.
- Meat industry: volume cutting of product that has not been boned.
- Large preparation room: whole loin and rib racks.
- Abattoirs and handling centres: bone-in breaking down.
- Volume catering: cutting up large pieces.
Technical specifications
| Band length |
2,120 mm |
| Dimensions |
2,120 × 16 × 0.50 mm (length × width × thickness) |
| Tooth type |
4 TPI (4 teeth per inch) |
| Tooth size |
6.35 mm (4 teeth per inch) |
| Teeth per inch (TPI) |
4 |
| Recommended use |
Bone-in meat: a very balanced option that improves the look of the cut. |
| Machine speed |
Especially suited to machines with a linear speed below 20 m/s |
| Application |
Cutting bone |
| Material |
Laminated carbon steel |
| Tooth profile |
Special pearled tooth, double life |
| Cut finish |
Clean, no residue |
| Performance |
High |
| Supply |
Box of 4 blades |
Cleaning a large saw takes its own slot
The bigger the saw, the more surface there is to clean and the more corners where residue collects.
Cleaning a large saw is not a last-five-minutes-of-the-day job. Give it its own slot, its own products and its own named responsible person, the same way you would for any other critical piece of equipment in the room.
What the supply includes
Box of four 2120 mm band saw blades for cutting bone.
The same length is available in a version for fresh meat.
Frequently asked questions
Which band do I need: meat, bone or frozen?
It depends on what you cut and on your saw’s linear speed (it is in the manual; if you do not know it, call us on +34 967 219 649 with the make and model). The three versions, in this length:
- MEAT (half-moon): 7 mm (half-moon) tooth. Recommended for fresh meat. Dimensions: 2,120 × 16 × 0.40 mm (length × width × thickness). See the 2,120 mm meat band.
- BONE (4 TPI): 6.35 mm (4 teeth per inch) tooth. A very balanced option for bone-in meat and for improving the look of the cut. Especially suited to machines with a linear speed below 20 m/s. Dimensions: 2,120 × 16 × 0.50 mm (length × width × thickness). (this blade)
- FROZEN (3 TPI): 8.46 mm (3 teeth per inch) tooth. Recommended for frozen product: a more aggressive cut and high production volume. Works especially well on machines with a linear speed above 20 m/s. Dimensions: 2,120 × 16 × 0.50 mm (length × width × thickness). Not in our range at 2,120 mm: see other lengths in Saw Blades.
How long does it take to clean a large saw properly?
Considerably longer than a compact one, and it is worth acknowledging that when planning the day. Taking the band off, cleaning housings, guides, table and tray, disinfecting and drying is a task in its own right within the cleaning plan.
Can it be cleaned with a pressure hose?
According to what the manufacturer specifies, and always with care around the electrical parts and the bearings. What must never be skipped is drying afterwards, above all the band.
How often is the band changed on a machine this size?
It depends on kilos and on the type of bone. In a high-volume cutting room consumption is noticeably higher than in a butcher’s shop; the practical answer is to record changes for a few weeks and learn the real rhythm.
Does changing the band need two people?
On large machines it is easier with two, particularly when handling a band over two metres long. What matters is doing it with the machine isolated and wearing suitable gloves.
Can this band be fitted to a smaller saw?
No. The length has to match exactly what the machine manufacturer specifies; 2120 mm belongs to one specific group of equipment.
How many blades come in a box, and how should I store spares?
Four blades, folded to take up less space and travel protected. Store them in their box, somewhere dry and with nothing heavy on top: moisture rusts carbon steel and crushing deforms the blade. When unfolding them, wear gloves and leave space around you, because the blade springs back into shape suddenly.
Other lengths and blade types