Polishing disc for Dick SM-100 and SM-90 knife sharpeners.
Dimensions: Ø200 x 25 x Ø16 mm.
90,50€ + VAT
Polishing disc for Dick SM-100 and SM-90 knife sharpeners.
Dimensions: Ø200 x 25 x Ø16 mm.
This polishing disc is the finishing element of the DICK SM-100 and SM-90 knife sharpeners. It measures Ø200 x 25 x Ø16 mm and is the part that removes the burr and leaves the edge finished after sharpening.
Polishing is the step that separates a knife that cuts for a while from one that cuts all day. After the sanding belt or flap disc, the edge retains a microscopic metal burr: it seems very sharp when tested, but that wire edge bends after a few minutes of work. The polisher removes it, and that is where the real working life of the edge begins.
| Product | Polishing disc for sharpener |
| Compatibility | DICK SM-100 and SM-90 sharpeners |
| Outer diameter | Ø 200 mm |
| Thickness | 25 mm |
| Inner diameter | Ø 16 mm |
Sharpening and polishing are different operations. Sharpening removes metal to rebuild the bevel; polishing does not remove appreciable material, but smooths and aligns the resulting edge. Skipping the second step is the most common mistake when sharpening with a machine, and explains the usual complaint that “I sharpened the knife this morning and it no longer cuts”.
It is the finishing element; each model’s sharpening abrasive —sanding belt on the SM-100, flap disc on the SM-90— is replaced separately.
At José Bernad, S.L. we have our own workshops and after-sales service to respond quickly to any issue with your equipment. If you have any questions before or after your purchase, call us on +34 967 219 649 or message us on WhatsApp.
Yes, it is the polishing disc common to the SM-100 and SM-90, measuring Ø200 x 25 x Ø16 mm. What changes between the two models is the sharpening element: a sanding belt on one and a flap disc on the other.
It lasts considerably longer than the sharpening abrasive, because it does not remove material but smooths. It is changed when it is visibly worn, deformed or no longer leaves the edge clean.
You can, but the result lasts much less. The burr left after sharpening bends in the first few hours of work and the knife stops cutting, giving the misleading impression that the machine does not sharpen well when the problem is the missing step.
The first value is the outer diameter of the disc, the second its thickness and the third the diameter of the central mounting hole. All three must match for the disc to fit and rotate balanced on the machine’s shaft.
No reviews for this product yet. Only customers who have purchased it can leave a review.